Construcción - Importación exportación

These are double helical gears with a right and left helix, with the teeth forming a V. Their objective is to eliminate axial forces and minimize slip errors. Capacities: -Diameters between 10 and 750 mm. -Modules between 1 and 20. -Diametral pitch between 50 and 1.5. -Carving lengths between 0 and 200mm.

- Diameters between 50 and 630 mm. - Modules between 1 and 12. - Diametral pitch between 50 and 2.5. - Carving lengths between 0 and 250 mm. - NILES grinding machine.

They are so named because the carving is done on the inside of a ring or wheel. Its main characteristic is that the toothing holes correspond to the teeth of an external carving. They are mainly used in planetary groups.

LOWER STRIPED: - Shaper Fellow. - Shredder. EXTERIOR STRIPED: - Mother strawberry cutter

Rack-type gears are special in that they are considered infinite diameter gear wheels. They are used to transform the circular movement of a gear into a rectilinear movement. Like the external teeth, the teeth of the racks can be straight and helical. CAPABILITIES: - Carving heights up to 200 mm. - Modules between 0.5 and 12. - Diametral pitch between 50 and 2.

They form mechanisms, together with the screws or endless shafts, and their objective is the transmission of great forces and the reduction of speed by increasing the transmission power. They normally work on 90º axes and have the disadvantage of being unable to reverse the direction of rotation, as well as high power consumption due to friction. Capacities: - Diameters between 10 and 1,000 mm. - Modules between 0.5 and 14. - Diametral pitch between 50 and 2. - Carving by tangential system of any module.

This type of gear allows the transmission of movement between axes that are far apart. The mechanism consists of a closed chain whose links mesh with the pinions fixed to the axes of the driving and driven mechanisms. CAPABILITIES: - Diameters between 10 and 1,200 mm. - Steps up to 50.8 mm (2").

Manufacture of special milling cutters on plan or according to customer needs.

Sharpening and coating of all types of tools, both standard and special.

Manufacture of Hss/co and tungsten carbide punches for stamping companies.

Manufacture of stepped drills to reduce times in the manufacture of parts.

Cutting tools for the aeronautical industry, automotive industry, fittings, etc.

Manufacture of standard drills in short, medium and long series.

Manufacture of special reamers according to drawing

Manufacture of special drills on plan or according to customer needs.

Spur gears are the most common type of gear manufactured. They are generally used for low and medium speeds, since at high speeds, if they are not rectified or corrected, they produce variable noise. CAPABILITIES: - Diameters between 10 and 1,500 mm. - Modules between 0.5 and 25. - Diametral pitch between 50 and 1. - Carving lengths between 0 and 400 mm. - Carving of pumped.

This gear, which is carried out by means of a toothed belt, allows the transmission of movement between axes that are far apart.

Todo tipo de recambios para maquinaria de tratamiento de áridos, martillos para molinos impactores, mandíbulas para machacadoras, etc.etc

Maquinaria para canteras, graveras, minería y Rcd

Overband, para diferentes anchos de cinta, 650-800-1000 Tromel Centro de tratamiento de Rcd, cabina de triaje y alimentador precribador

Desfillerizadores por aire, para eliminar el filler de la arena.